Conroe, Texas · ESD Flooring
ESD Flooring in ConroeStatic control for electronics, labs and manufacturing
New Era installs ESD static control flooring for homes and businesses across Conroe, Texas. Diamond-ground prep, premium product, finished fast and built to last a decade.
- 4.9 / 5 102 reviews
- Since 2015 Houston grown
- Decade build standard
- Espanol Hablamos
What esd flooring is, and why it works in Conroe
ESD (electrostatic control) flooring controls static so it cannot damage electronics, ignite in sensitive areas, or disrupt processes. The system carries a grounded conductive layer and meets defined resistance ranges for labs, electronics manufacturing and clean spaces, and we test and document the resistance on handover.
ESD Flooring across Conroe
We install ESD static control flooring throughout Conroe and the Montgomery County and north Houston, including these Conroe areas:
Where static control flooring goes in
If your process can be damaged, degraded or set off by a discharge, this is the floor for it. Tell us what you are protecting and we will spec it to your facility.
Cleanrooms & Labs
Seamless surfaces with integral cove, specified alongside your gowning and airflow protocol.
Warehousing & Distribution
Pick, pack and handling areas moving sensitive product, where the floor is the ground path for everything on it.
Process & Production
Lines running solvents, powders and volatile product, where a spark is a safety problem before it is a quality one.
How a static control floor actually goes down
Five stages. The last one is the one most contractors skip, and it is the only one that proves the floor does what the spec says.
Diamond grind the slab
Mechanical prep to clean, profiled concrete. No acid etch, no bonding to a surface that was never opened up.
Repair and level
Cracks, joints and spalls cut out and filled, moisture tested first and primed if the slab is pushing.
Lay the ground path
The conductive layer and its grounding connections, which is the part that makes it a static control floor instead of a coloured one.
Build the system
Base, conductive media and topcoat to the thickness your spec calls for, phased area by area so the line keeps running.
Test it and hand over readings
Point to point and point to ground measured on the finished floor, in writing. A floor nobody measured is a floor nobody can certify.
Why Conroe chooses New Era for ESD Flooring
We prep the concrete mechanically, use commercial-grade product, and stand behind it with a written warranty.
- Full diamond-grind surface prep on every Conroe job, the real reason esd flooring lasts a decade.
- Commercial-grade ESD static control flooring with the right primer, build and topcoat for your space.
- Written one-year workmanship warranty and a 4.9 star rating across 102 reviews.
- Fast-cure options and night or weekend scheduling so your Conroe home or business keeps moving.
- Established 2015, Houston grown, English and Spanish service end to end.
ESD Flooring in Conroe FAQ
Twenty-five straight answers for Conroe, and every one ends with the fastest way to get a quote.
Is ESD static control flooring slip resistant?
Yes. We add an anti-slip aggregate tuned to the space so ESD static control flooring meets safety standards while staying easy to clean. Ask about it on your free Conroe quote at (832) 253-3211.
How do I clean and maintain ESD static control flooring?
Use a cleaner approved for static control floors and nothing else. Wax and film-forming cleaners leave an insulating layer on top, and that is the most common reason a working ESD floor stops performing. The surface is seamless, so there are no grout lines holding dirt. We leave your Conroe maintenance crew written care instructions. Call (832) 253-3211.
Do you offer a warranty on ESD static control flooring in Conroe?
Yes, a written one-year workmanship warranty on every Conroe install, and we walk the finished floor with you before we call it done. Details at (832) 253-3211.
Can you install ESD static control flooring in Conroe around our business hours?
Yes. We schedule nights and weekends, phase the work area by area and use fast-cure systems so your Conroe line keeps running. Call (832) 253-3211 to plan it around your shift schedule.
Can you apply ESD static control flooring over an existing floor in Conroe?
Often yes. We assess the existing Conroe floor, mechanically remove failing coatings, repair the slab, then recoat. We never just paint over a bad floor. Book an assessment at (832) 253-3211.
What if my Conroe slab has moisture problems?
Texas slabs can push moisture, so we test first and install a moisture-mitigation primer when needed so your ESD static control flooring in Conroe will not bubble or delaminate. Start right, call (832) 253-3211.
Do you repair cracks before ESD static control flooring in Conroe?
Yes. Crack, joint and spall repair is part of our Conroe prep, so the finished floor is smooth and sound. Book your repair and quote at (832) 253-3211.
What colors and finishes can I get with ESD static control flooring in Conroe?
Dozens. Custom colors, flake blends, metallic effects, logos and solid colors are all on the table for your Conroe floor. We bring samples to your free estimate. Call (832) 253-3211.
Is ESD static control flooring good for commercial spaces in Conroe?
Yes. We install ESD static control flooring for Conroe shops, warehouses, showrooms and retail, built to take traffic, chemicals and daily abuse. Call (832) 253-3211 to plan your project.
How does ESD static control flooring compare to other floor options?
We will walk you through the trade-offs honestly and recommend the system that fits your Conroe space, budget and use, at no cost. Call (832) 253-3211 for a free consult.
Will ESD flooring in Conroe handle forklifts, pallet jacks and heavy point loads?
Done right with full prep, yes. We spec the build to your traffic and loads so it holds up for years in Conroe. Free quote at (832) 253-3211.
When can I use the floor after ESD static control flooring in Conroe?
Most Conroe floors are walkable in about 24 hours and ready for vehicles within a few days, sooner with fast-cure systems. We give you the exact schedule. Call (832) 253-3211.
What kind of facilities need ESD flooring in Conroe?
Electronics assembly, cleanrooms, labs, battery and electric vehicle plants, aerospace and defense, server rooms, and any Conroe facility running a static sensitive process. Static control flooring is industrial work with a measured electrical spec behind it. Call (832) 253-3211 and tell us what you are protecting.
Is ESD static control flooring chemical and stain resistant?
Yes. ESD static control flooring resists oil, chemicals and stains and wipes clean, which is why Conroe shops and plants rely on it. Ask us at (832) 253-3211.
Hablan Espanol en Conroe?
Si. Cotizamos y trabajamos en ingles o espanol en Conroe. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free estimates in Conroe?
Always. We walk the Conroe facility, measure, talk through the options and put the pricing in writing at no cost. Call (832) 253-3211 and we typically respond within 24 hours.
Can you add anti-slip or safety features to ESD static control flooring?
Yes. We add anti-slip aggregate, safety striping and zone markings to ESD static control flooring wherever you need them in Conroe. Call (832) 253-3211.
Can you handle large Conroe jobs and multi-phase work?
Yes. We have the crew and commercial equipment for large ESD static control flooring jobs in Conroe, phased so your operation never stops. Call (832) 253-3211.
What system do you use for ESD static control flooring?
We use commercial-grade products matched to your Conroe space, with full diamond-grind prep and the right primer, build and topcoat for the job. Call (832) 253-3211 to discuss.
What Conroe areas do you serve?
We install ESD static control flooring across Conroe and the surrounding Texas metros. Call (832) 253-3211 and we will confirm we serve your address and book a free estimate.
What resistance range does your ESD floor meet?
We install to your spec, typically dissipative or conductive ranges, and verify the readings before handover. Call (832) 253-3211 for a free Conroe quote.
Does ESD flooring need grounding?
Yes. We install a grounded conductive layer with grounding points so static drains safely to earth. Call (832) 253-3211 for a free Conroe quote.
Which standards does it meet?
We build to recognized ESD standards such as ANSI/ESD S20.20 and document the test results for your records. Call (832) 253-3211 for a free Conroe quote.
Is it suitable for electronics and labs?
Yes. ESD floors are designed for electronics manufacturing, labs, server and clean rooms. Call (832) 253-3211 for a free Conroe quote.
Do you test and document the performance?
Yes. We measure resistance across the floor and hand you the documentation on completion. Call (832) 253-3211 for a free Conroe quote.
More New Era floors in Conroe
Every system we install in Conroe, Texas:
ESD Flooring in other Texas cities
Get your ESD floor specified in Conroe
Free on-site assessment. Tell us the process you are protecting and the resistance range your spec calls for, and we will put the system and the pricing in writing.
