Pearland, Texas · ESD Flooring
ESD Flooring in PearlandStatic control for electronics, labs and manufacturing
New Era installs ESD static control flooring for homes and businesses across Pearland, Texas. Diamond-ground prep, premium product, finished fast and built to last a decade.
- 4.9 / 5 102 reviews
- Since 2015 Houston grown
- Decade build standard
- Espanol Hablamos
What esd flooring is, and why it works in Pearland
ESD (electrostatic control) flooring controls static so it cannot damage electronics, ignite in sensitive areas, or disrupt processes. The system carries a grounded conductive layer and meets defined resistance ranges for labs, electronics manufacturing and clean spaces, and we test and document the resistance on handover.
ESD Flooring across Pearland
We install ESD static control flooring throughout Pearland and the south Houston, including these Pearland areas:
Where static control flooring goes in
If your process can be damaged, degraded or set off by a discharge, this is the floor for it. Tell us what you are protecting and we will spec it to your facility.
Cleanrooms & Labs
Seamless surfaces with integral cove, specified alongside your gowning and airflow protocol.
Warehousing & Distribution
Pick, pack and handling areas moving sensitive product, where the floor is the ground path for everything on it.
Process & Production
Lines running solvents, powders and volatile product, where a spark is a safety problem before it is a quality one.
How a static control floor actually goes down
Five stages. The last one is the one most contractors skip, and it is the only one that proves the floor does what the spec says.
Diamond grind the slab
Mechanical prep to clean, profiled concrete. No acid etch, no bonding to a surface that was never opened up.
Repair and level
Cracks, joints and spalls cut out and filled, moisture tested first and primed if the slab is pushing.
Lay the ground path
The conductive layer and its grounding connections, which is the part that makes it a static control floor instead of a coloured one.
Build the system
Base, conductive media and topcoat to the thickness your spec calls for, phased area by area so the line keeps running.
Test it and hand over readings
Point to point and point to ground measured on the finished floor, in writing. A floor nobody measured is a floor nobody can certify.
Why Pearland chooses New Era for ESD Flooring
We prep the concrete mechanically, use commercial-grade product, and stand behind it with a written warranty.
- Full diamond-grind surface prep on every Pearland job, the real reason esd flooring lasts a decade.
- Commercial-grade ESD static control flooring with the right primer, build and topcoat for your space.
- Written one-year workmanship warranty and a 4.9 star rating across 102 reviews.
- Fast-cure options and night or weekend scheduling so your Pearland home or business keeps moving.
- Established 2015, Houston grown, English and Spanish service end to end.
ESD Flooring in Pearland FAQ
Twenty-five straight answers for Pearland, and every one ends with the fastest way to get a quote.
Can ESD static control flooring be installed in humid or cold weather in Pearland?
Yes. We use products and primers suited to Pearland conditions and control the environment so the floor cures right year round. Call (832) 253-3211.
Do you clean up after ESD static control flooring in Pearland?
Always. We protect the surroundings, contain dust with HEPA grinders and leave your Pearland space clean. Call (832) 253-3211.
What primer and topcoat do you use for ESD static control flooring?
We match the primer, build and topcoat to your Pearland slab and use, from fast-cure to chemical-resistant. Call (832) 253-3211 to discuss.
Will ESD static control flooring add value when selling in Pearland?
A clean, durable floor is a real selling point for Pearland buyers and shows the property was cared for. Call (832) 253-3211 for a free quote.
Do you offer financing for ESD static control flooring in Pearland?
Ask us about current options. We will give you straight Pearland pricing and work with your budget. Call (832) 253-3211.
How much does ESD static control flooring cost in Pearland?
Most ESD static control flooring projects in Pearland run $4 to $14 per square foot depending on the system, slab condition and size. We give free on-site estimates and put the number in writing, so call (832) 253-3211 for an exact Pearland number.
How long does ESD static control flooring take to install in Pearland?
A single room or bay is usually two to three days including prep and cure. Plant wide work gets phased area by area so you never take the whole floor out of service. Call (832) 253-3211 and we will scope it against your production schedule.
How long does ESD static control flooring last in Pearland?
With full diamond-grind prep and commercial-grade product, ESD static control flooring in Pearland is built to last a decade or more under daily use, backed by a written warranty. Get yours quoted at (832) 253-3211.
Do you diamond-grind and prep before ESD static control flooring in Pearland?
Yes. We mechanically diamond-grind every Pearland floor to clean, profiled concrete before any product goes down. That prep is why ESD static control flooring lasts a decade instead of peeling. Book your Pearland assessment at (832) 253-3211.
Is ESD static control flooring slip resistant?
Yes. We add an anti-slip aggregate tuned to the space so ESD static control flooring meets safety standards while staying easy to clean. Ask about it on your free Pearland quote at (832) 253-3211.
How do I clean and maintain ESD static control flooring?
Use a cleaner approved for static control floors and nothing else. Wax and film-forming cleaners leave an insulating layer on top, and that is the most common reason a working ESD floor stops performing. The surface is seamless, so there are no grout lines holding dirt. We leave your Pearland maintenance crew written care instructions. Call (832) 253-3211.
Do you offer a warranty on ESD static control flooring in Pearland?
Yes, a written one-year workmanship warranty on every Pearland install, and we walk the finished floor with you before we call it done. Details at (832) 253-3211.
Can you install ESD static control flooring in Pearland around our business hours?
Yes. We schedule nights and weekends, phase the work area by area and use fast-cure systems so your Pearland line keeps running. Call (832) 253-3211 to plan it around your shift schedule.
Can you apply ESD static control flooring over an existing floor in Pearland?
Often yes. We assess the existing Pearland floor, mechanically remove failing coatings, repair the slab, then recoat. We never just paint over a bad floor. Book an assessment at (832) 253-3211.
What if my Pearland slab has moisture problems?
Texas slabs can push moisture, so we test first and install a moisture-mitigation primer when needed so your ESD static control flooring in Pearland will not bubble or delaminate. Start right, call (832) 253-3211.
Do you repair cracks before ESD static control flooring in Pearland?
Yes. Crack, joint and spall repair is part of our Pearland prep, so the finished floor is smooth and sound. Book your repair and quote at (832) 253-3211.
What colors and finishes can I get with ESD static control flooring in Pearland?
Dozens. Custom colors, flake blends, metallic effects, logos and solid colors are all on the table for your Pearland floor. We bring samples to your free estimate. Call (832) 253-3211.
Is ESD static control flooring good for commercial spaces in Pearland?
Yes. We install ESD static control flooring for Pearland shops, warehouses, showrooms and retail, built to take traffic, chemicals and daily abuse. Call (832) 253-3211 to plan your project.
How does ESD static control flooring compare to other floor options?
We will walk you through the trade-offs honestly and recommend the system that fits your Pearland space, budget and use, at no cost. Call (832) 253-3211 for a free consult.
Will ESD flooring in Pearland handle forklifts, pallet jacks and heavy point loads?
Done right with full prep, yes. We spec the build to your traffic and loads so it holds up for years in Pearland. Free quote at (832) 253-3211.
What resistance range does your ESD floor meet?
We install to your spec, typically dissipative or conductive ranges, and verify the readings before handover. Call (832) 253-3211 for a free Pearland quote.
Does ESD flooring need grounding?
Yes. We install a grounded conductive layer with grounding points so static drains safely to earth. Call (832) 253-3211 for a free Pearland quote.
Which standards does it meet?
We build to recognized ESD standards such as ANSI/ESD S20.20 and document the test results for your records. Call (832) 253-3211 for a free Pearland quote.
Is it suitable for electronics and labs?
Yes. ESD floors are designed for electronics manufacturing, labs, server and clean rooms. Call (832) 253-3211 for a free Pearland quote.
Do you test and document the performance?
Yes. We measure resistance across the floor and hand you the documentation on completion. Call (832) 253-3211 for a free Pearland quote.
More New Era floors in Pearland
Every system we install in Pearland, Texas:
ESD Flooring in other Texas cities
Get your ESD floor specified in Pearland
Free on-site assessment. Tell us the process you are protecting and the resistance range your spec calls for, and we will put the system and the pricing in writing.
