Katy, Texas · ESD Flooring
ESD Flooring in KatyStatic control for electronics, labs and manufacturing
New Era installs ESD static control flooring for homes and businesses across Katy, Texas. Diamond-ground prep, premium product, finished fast and built to last a decade.
- 4.9 / 5 102 reviews
- Since 2015 Houston grown
- Decade build standard
- Espanol Hablamos
What esd flooring is, and why it works in Katy
ESD (electrostatic control) flooring controls static so it cannot damage electronics, ignite in sensitive areas, or disrupt processes. The system carries a grounded conductive layer and meets defined resistance ranges for labs, electronics manufacturing and clean spaces, and we test and document the resistance on handover.
ESD Flooring across Katy
We install ESD static control flooring throughout Katy and the west Houston, including these Katy areas:
Where static control flooring goes in
If your process can be damaged, degraded or set off by a discharge, this is the floor for it. Tell us what you are protecting and we will spec it to your facility.
Cleanrooms & Labs
Seamless surfaces with integral cove, specified alongside your gowning and airflow protocol.
Warehousing & Distribution
Pick, pack and handling areas moving sensitive product, where the floor is the ground path for everything on it.
Process & Production
Lines running solvents, powders and volatile product, where a spark is a safety problem before it is a quality one.
How a static control floor actually goes down
Five stages. The last one is the one most contractors skip, and it is the only one that proves the floor does what the spec says.
Diamond grind the slab
Mechanical prep to clean, profiled concrete. No acid etch, no bonding to a surface that was never opened up.
Repair and level
Cracks, joints and spalls cut out and filled, moisture tested first and primed if the slab is pushing.
Lay the ground path
The conductive layer and its grounding connections, which is the part that makes it a static control floor instead of a coloured one.
Build the system
Base, conductive media and topcoat to the thickness your spec calls for, phased area by area so the line keeps running.
Test it and hand over readings
Point to point and point to ground measured on the finished floor, in writing. A floor nobody measured is a floor nobody can certify.
Why Katy chooses New Era for ESD Flooring
We prep the concrete mechanically, use commercial-grade product, and stand behind it with a written warranty.
- Full diamond-grind surface prep on every Katy job, the real reason esd flooring lasts a decade.
- Commercial-grade ESD static control flooring with the right primer, build and topcoat for your space.
- Written one-year workmanship warranty and a 4.9 star rating across 102 reviews.
- Fast-cure options and night or weekend scheduling so your Katy home or business keeps moving.
- Established 2015, Houston grown, English and Spanish service end to end.
ESD Flooring in Katy FAQ
Twenty-five straight answers for Katy, and every one ends with the fastest way to get a quote.
How soon can you start ESD static control flooring in Katy?
Often within a week or two depending on the season and scope. Call (832) 253-3211 and we will lock your Katy date.
Do you take small ESD static control flooring jobs in Katy?
Yes. From a single equipment room to a full Katy plant, we size the crew to the job. Call (832) 253-3211 for a free quote.
Can ESD static control flooring be installed in humid or cold weather in Katy?
Yes. We use products and primers suited to Katy conditions and control the environment so the floor cures right year round. Call (832) 253-3211.
Do you clean up after ESD static control flooring in Katy?
Always. We protect the surroundings, contain dust with HEPA grinders and leave your Katy space clean. Call (832) 253-3211.
What primer and topcoat do you use for ESD static control flooring?
We match the primer, build and topcoat to your Katy slab and use, from fast-cure to chemical-resistant. Call (832) 253-3211 to discuss.
Will ESD static control flooring add value when selling in Katy?
A clean, durable floor is a real selling point for Katy buyers and shows the property was cared for. Call (832) 253-3211 for a free quote.
Do you offer financing for ESD static control flooring in Katy?
Ask us about current options. We will give you straight Katy pricing and work with your budget. Call (832) 253-3211.
How much does ESD static control flooring cost in Katy?
Most ESD static control flooring projects in Katy run $4 to $14 per square foot depending on the system, slab condition and size. We give free on-site estimates and put the number in writing, so call (832) 253-3211 for an exact Katy number.
How long does ESD static control flooring take to install in Katy?
A single room or bay is usually two to three days including prep and cure. Plant wide work gets phased area by area so you never take the whole floor out of service. Call (832) 253-3211 and we will scope it against your production schedule.
How long does ESD static control flooring last in Katy?
With full diamond-grind prep and commercial-grade product, ESD static control flooring in Katy is built to last a decade or more under daily use, backed by a written warranty. Get yours quoted at (832) 253-3211.
Do you diamond-grind and prep before ESD static control flooring in Katy?
Yes. We mechanically diamond-grind every Katy floor to clean, profiled concrete before any product goes down. That prep is why ESD static control flooring lasts a decade instead of peeling. Book your Katy assessment at (832) 253-3211.
Is ESD static control flooring slip resistant?
Yes. We add an anti-slip aggregate tuned to the space so ESD static control flooring meets safety standards while staying easy to clean. Ask about it on your free Katy quote at (832) 253-3211.
How do I clean and maintain ESD static control flooring?
Use a cleaner approved for static control floors and nothing else. Wax and film-forming cleaners leave an insulating layer on top, and that is the most common reason a working ESD floor stops performing. The surface is seamless, so there are no grout lines holding dirt. We leave your Katy maintenance crew written care instructions. Call (832) 253-3211.
Do you offer a warranty on ESD static control flooring in Katy?
Yes, a written one-year workmanship warranty on every Katy install, and we walk the finished floor with you before we call it done. Details at (832) 253-3211.
Can you install ESD static control flooring in Katy around our business hours?
Yes. We schedule nights and weekends, phase the work area by area and use fast-cure systems so your Katy line keeps running. Call (832) 253-3211 to plan it around your shift schedule.
Can you apply ESD static control flooring over an existing floor in Katy?
Often yes. We assess the existing Katy floor, mechanically remove failing coatings, repair the slab, then recoat. We never just paint over a bad floor. Book an assessment at (832) 253-3211.
What if my Katy slab has moisture problems?
Texas slabs can push moisture, so we test first and install a moisture-mitigation primer when needed so your ESD static control flooring in Katy will not bubble or delaminate. Start right, call (832) 253-3211.
Do you repair cracks before ESD static control flooring in Katy?
Yes. Crack, joint and spall repair is part of our Katy prep, so the finished floor is smooth and sound. Book your repair and quote at (832) 253-3211.
What colors and finishes can I get with ESD static control flooring in Katy?
Dozens. Custom colors, flake blends, metallic effects, logos and solid colors are all on the table for your Katy floor. We bring samples to your free estimate. Call (832) 253-3211.
Is ESD static control flooring good for commercial spaces in Katy?
Yes. We install ESD static control flooring for Katy shops, warehouses, showrooms and retail, built to take traffic, chemicals and daily abuse. Call (832) 253-3211 to plan your project.
What resistance range does your ESD floor meet?
We install to your spec, typically dissipative or conductive ranges, and verify the readings before handover. Call (832) 253-3211 for a free Katy quote.
Does ESD flooring need grounding?
Yes. We install a grounded conductive layer with grounding points so static drains safely to earth. Call (832) 253-3211 for a free Katy quote.
Which standards does it meet?
We build to recognized ESD standards such as ANSI/ESD S20.20 and document the test results for your records. Call (832) 253-3211 for a free Katy quote.
Is it suitable for electronics and labs?
Yes. ESD floors are designed for electronics manufacturing, labs, server and clean rooms. Call (832) 253-3211 for a free Katy quote.
Do you test and document the performance?
Yes. We measure resistance across the floor and hand you the documentation on completion. Call (832) 253-3211 for a free Katy quote.
More New Era floors in Katy
Every system we install in Katy, Texas:
ESD Flooring in other Texas cities
Get your ESD floor specified in Katy
Free on-site assessment. Tell us the process you are protecting and the resistance range your spec calls for, and we will put the system and the pricing in writing.
